R2511-HP MSR Router Series Network Management and Monitoring Configuration Guide(V5)

78
Task Remarks
Enabling CWMP Required.
Configuring ACS attributes:
• Configuring the ACS URL
Required.
Supports configuration through ACS,
DHCP, and CLI.
• Configuring the ACS username and password
Optional.
Supports configuration through ACS,
DHCP, and CLI.
Configuring CPE attributes:
• Configuring the CPE username and password
Optional.
Supports configuration through ACS and
CLI.
• Configuring the CWMP connection interface
Optional.
Supports configuration through CLI only.
• Sending Inform messages
Optional.
Supports configuration through ACS and
CLI.
• Configuring the maximum number of attempts made to retry a
connection
Optional.
Supports configuration through CLI only.
• Configuring the close-wait timer of the CPE
Optional.
Supports configuration through CLI only.
• Configuring the CPE working mode
Optional.
Supports configuration through CLI only.
• Specifying an SSL client policy for HTTPS connection to ACS
Optional.
Supports configuration through CLI only.
Enabling CWMP
CWMP configurations can take effect only after you enable CWMP.
To enable CWMP:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter CWMP view.
cwmp N/A
3. Enable CWMP.
cwmp enable By default, CWMP is disabled.
Configuring ACS attributes
ACS attributes include ACS URL, username and password. When the CPE initiates a connection to the
ACS, the ACS URL, username and password are carried in the connection request. After the ACS receives