R2511-HP MSR Router Series OAA Command Reference(V5)

16
Views
ACSEI server view
Default command level
2: System level
Parameters
minutes: Value of the synchronization timer that is used for clock synchronization from the ACSEI server
to the ACSEI client. It is in the range of 0 to 1440 (in minutes). Setting it to 0 disables the clock
synchronization from ACSEI server to ACSEI client.
Examples
# Set the clock synchronization timer from ACSEI server to ACSEI client to 20 minutes.
<Sysname> system-view
[Sysname] acsei server
[Sysname-acsei-server] acsei timer clock-sync 20
acsei timer monitor
Use acsei timer monitor to set the monitoring timer for ACSEI server to monitor ACSEI client.
Use undo acsei timer monitor to restore the default.
Syntax
acsei timer monitor seconds
undo acsei timer monitor
Default
The monitoring timer is set to 5 seconds.
Views
ACSEI server view
Default command level
2: System level
Parameters
seconds: Value of the monitoring timer that is used for ACSEI server to monitor ACSEI clients. It is in the
range of 0 to 10 (in seconds). Setting it to 0 disables ACSEI server from monitoring ACSEI client.
Examples
# Set the monitor timer for ACSEI server to monitor ACSEI client to 6 seconds.
<Sysname> system-view
[Sysname] acsei server
[Sysname-acsei-server] acsei timer monitor 6
display acsei client info
Use display acsei client info to display the ACSEI client information. The client information is retrieved
from the advertisement packet sent by the ACSEI client, so when there is no ACSEI client information, the
command displays only the information keywords.