R2511-HP MSR Router Series OAA Command Reference(V5)

20
<Sysname> display acsei client summary 1
Total Client Number: 1
Client ID: 1
Status: Open
MAC Address: 00e0-fc0a-c3ef
Interface: GigabitEthernet5/0
Last registered: 02/08/2007 12:00:00
# Display the summary of all ACSEI clients.
<Sysname> display acsei client summary
Total Client Number: 2
Client ID: 1
Status: Open
MAC Address: 00e0-fc0a-c3ef
Interface: GigabitEthernet5/0
Last registered: 02/08/2007 12:00:00
Client ID: 2
Status: Open
MAC Address: 00e0-fa1e-03da
Interface: GigabitEthernet6/0
Last registered: 02/08/2007 13:00:00
Table 7 Command output
Field Descri
p
tion
Client ID ID of the ACSEI client.
Status ACSEI client status.
MAC Address MAC address of the ACSEI client.
Interface Interface carrying the ACSEI client.
Last registered Last registration time of the ACSEI client.
ACSEI client configuration commands (Linux
system)
Two kinds of ACSEI clients have been developed. Different ACSEI clients need different configurations.
The following commands are available for the ACSEI client running on an OAP module installed with the
Linux system.
The following commands can be executed in any directory of the Linux system. You must log in to the
Linux system on an OAP module before executing the following commands. For more information about
the login method, see OAA Configuration Guide.
The following commands are those on the Linux system on the OAP module and have no command levels.
As the command level of the oap connect slot command used to log in to the OAP Linux system is 2, the
default level of the following commands is 2, too.