R2511-HP MSR Router Series OAA Command Reference(V5)

2
oap reboot
Use oap reboot to reset the OAP module.
Syntax
oap reboot slot slot-number
Views
User view
Default command level
3: Manage level
Parameters
slot slot-number: Specifies the number of the slot where an OAP module resides.
Examples
# Reset the OAP module in slot 3.
<Sysname> oap reboot slot 3
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.