R2511-HP MSR Router Series Security Command Reference(V5)

122
Field Descri
p
tion
Critical recovery-action
Action that the port takes when an active (reachable)
authentication server is detected available for the 802.1X
users in the critical VLAN:
• reinitialize—The port triggers authentication.
• NOT configured—The port does not trigger authentication.
Max number of on-line users Maximum number of concurrent 802.1X users on the port.
EAPOL Packet Number of sent (Tx) and received (Rx) EAPOL packets.
Sent EAP Request/Identity Packets Number of sent EAP-Request/Identity packets.
EAP Request/Challenge Packets Number of sent EAP-Request/Challenge packets.
EAP Success Packets Number of sent EAP Success packets.
Fail Packets Number of sent EAP-Failure packets.
Received EAPOL Start Packets Number of received EAPOL-Start packets.
EAPOL LogOff Packets Number of received EAPOL-LogOff packets.
EAP Response/Identity Packets Number of received EAP-Response/Identity packets.
EAP Response/Challenge Packets Number of received EAP-Response/Challenge packets.
Error Packets Number of received error packets.
Controlled User(s) amount Number of authenticated users on the port.
Related commands
• reset dot1x statistics
• dot1x
• dot1x retry
• dot1x max-user
• dot1x port-control
• dot1x port-method
• dot1x timer
dot1x
Use dot1x to enable 802.1X.
Use undo dot1x to disable 802.1X.
Syntax
In system view:
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
In Ethernet interface view:
dot1x
undo dot1x