R2511-HP MSR Router Series Security Command Reference(V5)

136
or port ranges for this argument. The start port number must be smaller than the end number and the two
ports must be the same type.
Usage guidelines
In system view, if no interface is specified, the command applies to all ports.
Examples
# Configure port Ethernet 1/1 to implement port-based access control.
<Sysname> system-view
[Sysname] dot1x port-method portbased interface ethernet 1/1
Or
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] dot1x port-method portbased
# Configure ports Ethernet 1/2 through Ethernet 1/5 to implement port-based access control.
<Sysname> system-view
[Sysname] dot1x port-method portbased interface ethernet 1/2 to ethernet 1/5
Related commands
display dot1x
dot1x quiet-period
Use dot1x quiet-period to enable the quiet timer. When a client fails 802.1X authentication, the device
must wait a period of time before it can process authentication requests from the client.
Use undo dot1x quiet-period to disable the timer.
Syntax
dot1x quiet-period
undo dot1x quiet-period
Default
The quiet timer is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable the quiet timer.
<Sysname> system-view
[Sysname] dot1x quiet-period
Related commands
• display dot1x
• dot1x timer