R2511-HP MSR Router Series Security Command Reference(V5)

139
Parameters
logoff: Logs off a user accessing the network through a proxy.
trap: Sends a trap to the network management system when a user is detected accessing the network
through a proxy.
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10 ports
or port ranges. The start port number must be smaller than the end number and the two ports must be of
the same type. If no interface is specified, the command applies to all ports.
Usage guidelines
This function requires the cooperation of the iNode client software.
The proxy detection function must be enabled both globally in system view and for the intended ports in
system view or Ethernet interface view. Otherwise, it does not work.
Examples
# Configure ports Ethernet 1/1 to 1/8 to log off users accessing the network through a proxy.
<Sysname> system-view
[Sysname] dot1x supp-proxy-check logoff
[Sysname] dot1x supp-proxy-check logoff interface ethernet 1/1 to ethernet 1/8
# Configure port Ethernet 1/9 to send a trap when a user is detected accessing the network through a
proxy.
<Sysname> system-view
[Sysname] dot1x supp-proxy-check trap
[Sysname] dot1x supp-proxy-check trap interface ethernet 1/9
Or
<Sysname> system-view
[Sysname] dot1x supp-proxy-check trap
[Sysname] interface ethernet 1/9
[Sysname-Ethernet1/9] dot1x supp-proxy-check trap
Related commands
display dot1x
dot1x timer
Use dot1x timer to set 802.1X timers.
Use undo dot1x timer to restore the defaults.
Syntax
dot1x timer { handshake-period handshake-period-value | quiet-period quiet-period-value |
reauth-period reauth-period-value | server-timeout server-timeout-value | supp-timeout
supp-timeout-value | tx-period tx-period-value }
undo dot1x timer { handshake-period | quiet-period | reauth-period | server-timeout | supp-timeout
| tx-period }