R2511-HP MSR Router Series Security Command Reference(V5)

142
Views
User view
Default command level
2: System level
Parameters
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10 ports
or port ranges. The start port number must be smaller than the end number and the two ports must be of
the same type.
Usage guidelines
If a list of ports is specified, the command clears 802.1X statistics for all the specified ports. If no ports are
specified, the command clears all 802.1X statistics.
Examples
# Clear 802.1X statistics on port Ethernet 1/1.
<Sysname> reset dot1x statistics interface ethernet 1/1
Related commands
display dot1x