R2511-HP MSR Router Series Security Command Reference(V5)

144
Related commands
display dot1x
dot1x timer ead-timeout
Use dot1x timer ead-timeout to set the EAD rule timer.
Use undo dot1x timer ead-timeout to restore the default.
Syntax
dot1x timer ead-timeout ead-timeout-value
undo dot1x timer ead-timeout
Default
The timer is 30 minutes.
Views
System view
Default command level
2: System level
Parameters
ead-timeout-value: Specifies the EAD rule timer in minutes. The value range is 1 to 1440.
Usage guidelines
EAD fast deployment automatically creates an ACL rule, or EAD rule, to open access to the redirect URL
for each redirected user seeking to access the network. The EAD rule timer sets the lifetime of each ACL
rule. When the timer expires or the user passes authentication, the rule is removed. If users fail to
download EAD client or pass authentication before the timer expires, they must reconnect to the network
to access the free IP.
To prevent ACL rule resources from being used up, you can shorten the timer when the amount of EAD
users is large.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
dot1x timer
ead-timeout
No No No No
Only available on
MSR30-11E and
MSR30-11F
No No
Examples
# Set the EAD rule timer to 5 minutes.
<Sysname> system-view
[Sysname] dot1x timer ead-timeout 5
Related commands
display dot1x