R2511-HP MSR Router Series Security Command Reference(V5)

1
AAA configuration commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
The following matrix shows the FIPS and hardware compatibility:
Hardware FIPS mode
MSR900 No.
MSR93X No.
MSR20-1X No.
MSR20 Yes.
MSR30 Yes (except the MSR30-16).
MSR50 Yes.
MSR1000 Yes.
General AAA configuration commands
aaa nas-id profile
Use aaa nas-id profile to create a NAS ID profile and enter its view. A NAS ID profile maintains the
bindings between NAS IDs and VLANs.
Use undo aaa nas-id profile to remove a NAS ID profile.
Syntax
aaa nas-id profile profile-name
undo aaa nas-id profile profile-name
Views
System view
Default command level
2: System level
Parameters
profile-name: Specifies the name of the NAS ID profile, a case-insensitive string of 1 to 16 characters.
Examples
# Create a NAS ID profile named aaa.
<Sysname> system-view
[Sysname] aaa nas-id profile aaa
[Sysname-nas-id-prof-aaa]