R2511-HP MSR Router Series Security Command Reference(V5)

196
display ipsec tunnel
Use display ipsec tunnel to display information about IPsec tunnels.
Syntax
display ipsec tunnel [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any parameters, the command displays information about all IPsec tunnels.
Examples
# Display information about IPsec tunnels.
<Sysname> display ipsec tunnel
total tunnel : 2
------------------------------------------------
connection id: 3
perfect forward secrecy:
SA's SPI:
inbound: 187199087 (0xb286e6f) [ESP]
outbound: 3562274487 (0xd453feb7) [ESP]
tunnel:
local address: 44.44.44.44
remote address : 44.44.44.55
flow:
sour addr : 44.44.44.0/255.255.255.0 port: 0 protocol : IP
dest addr : 44.44.44.0/255.255.255.0 port: 0 protocol : IP
current Encrypt-card:
------------------------------------------------
connection id: 5
perfect forward secrecy:
SA's SPI:
inbound: 12345 (0x3039) [ESP]
outbound: 12345 (0x3039) [ESP]
tunnel: