R2511-HP MSR Router Series Security Command Reference(V5)

216
Views
System view
Default command level
2: System level
Parameters
seconds: Specifies the IPsec session idle timeout in seconds, in the range of 60 to 3600.
Examples
# Set the IPsec session idle timeout to 600 seconds.
<Sysname> system-view
[Sysname] ipsec session idle-time 600
ipsec transform-set
Use ipsec transform-set to create an IPsec transform set and enter IPsec transform set view.
Use undo ipsec transform-set to delete an IPsec transform set.
Syntax
ipsec transform-set transform-set-name
undo ipsec transform-set transform-set-name
Default
No IPsec transform set exists.
Views
System view
Default command level
2: System level
Parameters
transform-set-name: Specifies the name of an IPsec transform set, a case-insensitive string of 1 to 32
characters.
Examples
# Create an IPsec transform set named tran1 and enter its view.
<Sysname> system-view
[Sysname] ipsec transform-set tran1
[Sysname-ipsec-transform-set-tran1]
Related commands
display ipsec transform-set
local-address
Use local-address to configure the local gateway IP address.
Use undo local-address to restore the default.