R2511-HP MSR Router Series Security Command Reference(V5)

219
[Sysname-ipsec-policy-isakmp-policy1-100] policy enable
Related commands
• ipsec policy (system view)
• ipsec policy-template
qos pre-classify
Use qos pre-classify to enable packet information pre-extraction.
Use undo qos pre-classify to restore the default.
Syntax
qos pre-classify
undo qos pre-classify
Default
Packet information pre-extraction is disabled.
Views
IPsec policy view, IPsec policy template view
Default command level
2: System level
Usage guidelines
With the packet information pre-extraction feature enabled, QoS classifies a packet based on the header
of the original IP packet—the header of the IP packet that has not been encapsulated by IPsec.
Examples
# Enable packet information pre-extraction.
<Sysname> system-view
[Sysname] ipsec policy policy1 100 manual
[Sysname-ipsec-policy-manual-policy1-100] qos pre-classify
Related commands
• ipsec policy (system view)
• ipsec policy-template
remote-address
Use remote-address to configure the remote gateway IP address.
Use undo remote-address to restore the default.
Syntax
remote-address { [ ipv6 ] host-name [ dynamic ] | ipv4-address | ipv6 ipv6-address }
undo remote-address { [ ipv6 ] host-name [ dynamic ] | ipv4-address | ipv6 ipv6-address }
Default
No remote gateway IP address is configured.