R2511-HP MSR Router Series Security Command Reference(V5)

222
Parameters
integer: Specifies the ID of the IPsec tunnel, in the range of 1 to 2000000000.
Examples
# Clear all IPsec sessions.
<Sysname> reset ipsec session
# Clear the sessions of IPsec tunnel 5.
<Sysname> reset ipsec session tunnel-id 5
Related commands
display ipsec session
reset ipsec statistics
Use reset ipsec statistics to clear IPsec packet statistics.
Syntax
reset ipsec statistics
Views
User view
Default command level
1: Monitor level
Examples
# Clear IPsec packet statistics.
<Sysname> reset ipsec statistics
Related commands
display ipsec statistics
reverse-route
Use reverse-route to enable and configure the IPsec Reverse Route Inject (RRI) feature.
Use undo reverse-route to disable IPsec RRI.
Syntax
reverse-route [ remote-peer ip-address [ gateway | static ] | static ]
undo reverse-route
Default
IPsec RRI is disabled.
Views
IPsec policy view, IPsec policy template view
Default command level
2: System level