R2511-HP MSR Router Series Security Command Reference(V5)

264
Syntax
remote-name name
undo remote-name
Views
IKE peer view
Default command level
2: System level
Parameters
name: Specifies the name of the peer security gateway for IKE negotiation, a string of 1 to 255
characters.
Usage guidelines
If you configure the id-type name or id-type user-fqdn command on the initiator, the IKE negotiation
initiator sends its security gateway name as its ID for IKE negotiation, and the peer uses the security
gateway name configured with the remote-name command to authenticate the initiator. Make sure the
local gateway name matches the remote gateway name configured on the peer.
Examples
# Configure the remote security gateway name as apple for IKE peer peer1.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] remote-name apple
Related commands
• id-type
• local-name
• ike local-name
reset ike sa
Use reset ike sa to clear IKE SAs.
Syntax
reset ike sa [ connection-id ]
Views
User view
Default command level
2: System level
Parameters
connection-id: Specifies the connection ID of the IKE SA to be cleared, in the range of 1 to
2000000000.
Usage guidelines
If you do not specify any parameter, the command clears all ISAKMP SAs.