R2511-HP MSR Router Series Security Command Reference(V5)

269
client configuration address respond
Use client configuration address respond to enable the device to accept the IP address allocation
requests from IKEv2 negotiation initiators.
Use undo client configuration address respond to restore the default.
Syntax
client configuration address respond
undo client configuration address respond
Default
The device does not accept the IP address allocation requests from initiators.
Views
IKEv2 profile view
Default command level
2: System level
Usage guidelines
In a scenario where remote users need to use IPsec VPN to access the enterprise network and the remote
hosts need temporary IP addresses for IPsec communication, the branch gateways must generate and
send address allocation requests to the headquarters gateway, and the headquarters gateway must
accept the requests.
Examples
# Create an IKEv2 profile named profile1.
<Sysname> system-view
[Sysname] ikev2 profile profile1
# Enable the device to accept the IP address allocation requests from IKEv2 negotiation initiators.
[Sysname-ikev2-profile-profile1] client configuration address respond
Related commands
• display ikev2 profile
• connect auto
connect auto
Use connect auto to enable the device to initiate IP address allocation requests when acting as an IKEv2
negotiation initiator.
Use undo connect auto to restore the default.
Syntax
connect auto
undo connect auto
Default
The device does not initiate IP address allocation requests when acting as an IKEv2 negotiation initiator.