R2511-HP MSR Router Series Security Command Reference(V5)

294
Default command level
2: System level
Parameters
prefix-length: Specifies the prefix length for the IPv6 addresses in the local IPv6 address pool, in the
range of 0 to 128.
Examples
# Set the prefix length of the IPv6 address pool referenced by IKEv2 profile profile1 to 64.
<Sysname> system-view
[Sysname] ikev2 profile profile1
[Sysname-ikev2-profile-profile1] ipv6-mask 64
Related commands
• ikev2 ipv6-pool
• ipv6-pool
ipv6-pool
Use ipv6-pool to specify an IPv6 address pool for an IKEv2 profile.
Use undo ipv6-pool to remove the configuration.
Syntax
ipv6-pool pool-name
undo ipv6-pool
Default
An IKEv2 profile references no address pool.
Views
IKEv2 profile view
Default command level
2: System level
Parameters
pool-name: Specifies the IPv6 address pool name, a case-insensitive string of 1 to 32 characters.
Usage guidelines
If the peer sends IPv6 address allocation requests and the local end accepts address allocation requests,
the local end assigns an available IPv6 addresses in the profile's IPv6 address pool to the peer and sends
the address to the peer in an IKE response packet.
Examples
# Configure IKEv2 profile profile1 to use IPv6 address pool ipv6pool.
<Sysname> system-view
[Sysname] ikev2 profile profile1
[Sysname-ikev2-profile-profile1] ipv6-pool ipv6pool
Related commands
• ikev2 ipv6-pool