R2511-HP MSR Router Series Security Command Reference(V5)

19
authentication voip
Use authentication voip to configure the authentication method for VoIP users.
Use undo authentication voip to restore the default.
Syntax
authentication voip radius-scheme radius-scheme-name
undo authentication voip
Default
The default authentication method for the ISP domain is used for VoIP users.
Views
ISP domain view
Default command level
2: System level
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The specified RADIUS scheme must have been configured.
To implement VoIP user authentication, you must complete the following tasks:
• Enable the authentication function for VoIP service.
• Configure an authentication method for VoIP users.
For more information about the commands to be used to enable authentication for VoIP service, see Voice
Command Reference.
Examples
# Configure ISP domain test to use RADIUS authentication scheme rd for VoIP users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication voip radius-scheme rd
Related commands
• authentication default
• radius scheme
authentication super
Use authentication super to configure the authentication method for user privilege level switching.
Use undo authentication super to restore the default.
Syntax
authentication super { hwtacacs-scheme hwtacacs-scheme-name | radius-scheme
radius-scheme-name }
undo authentication super