R2511-HP MSR Router Series Security Command Reference(V5)

345
c/TQ0a0g95Khdy+yl4eDKaFiQQ+Kqn4zdzDTDNq7LRtqr7lGQzVw6srfrr71ib7J
yJFdi2RXETEgOS/jE+xGtNqd38F/YzIRPax7NNMK+hAJC2MzdbN/BEoLWOqG7Plm
hvCE3LFxelExLJU+0XfAX77TI2+5LEHBi1UiGLeH08fd1XUQCefARlIxGoRJdtTu
gHP4+NF4PC9B1/GZoAYUp+171p1QwPk0vyU3TXijueqVUpQBUHGxSE0UW+SS1iwL
8vsSLHIwK4aZ77Z1o+Uw1QBoqw9jpubG4gUkX8RII8E8b13I6/QTH78E4/FgAmIQ
HTYnE2RDHXkhPGR5FGJsZnd21XLvd2BEkGGmhTk80nDeiI2XH3D48E6UahQwcam/
q/txd/KsLnp0rpJkc/WhOTprioeLQQEBayixKRWzNLsZt3L6lqYbA01Z1THho+EV
0Ng0EZKQyiRV1j7gsBYFRinbSAsIpeYlr7gDAnBCRJdSfPNBKG+ewg==
-----END RSA PRIVATE KEY-----
^C
Please input the password:12345678
[Sysname]
# If an RSA key pair with the same name already exists, specify whether to overwrite the existing key pair.
Warning: The device already has a key pair with the same name. If you choose to continue,
the existing key pair will be overwritten.
Continue? [Y/N]:
Related commands
public-key local export
public-key peer
Use public-key peer to specify a name for the peer public key and enter public key view.
Use undo public-key peer to remove the public key.
Syntax
public-key peer keyname
undo public-key peer keyname
Views
System view
Default command level
2: System level
Parameters
keyname: Specifies a name for the peer public key on the local device, a case-sensitive string of 1 to 64
characters.
Usage guidelines
To manually configure the peer public key on the local device, obtain the public key in hexadecimal from
the peer device beforehand, and perform the following configurations on the local device:
1. Execute the public-key peer command, and then the public-key-code begin command to enter
public key code view.
2. Type the peer public key.
3. Execute the public-key-code end command to save the public key and return to public key view.
4. Execute the peer-public-key end command to return to system view.