R2511-HP MSR Router Series Security Command Reference(V5)

358
Status: Portal running
Portal server: servername
Portal backup-group: 1
Authentication type: Layer3
Authentication domain: my-domain
Authentication network:
Source IP: 1.1.1.1 Mask : 255.255.0.0
Table 49 Command output
Field Descri
p
tion
Portal configuration of interface Portal configuration on the interface.
IPv4 IPv4 portal configuration.
IPv6 IPv6 portal configuration.
Status
Status of the portal authentication on the interface:
• Portal disabled—Portal authentication is disabled.
• Portal enabled—Portal authentication is enabled but is not functioning.
• Portal running—Portal authentication is functioning.
Portal server Portal server referenced by the interface.
Authentication type Authentication mode enabled on the interface.
Authentication domain Mandatory authentication domain of the interface.
Authentication network
Information of the portal authentication source subnet and destination
subnet.
Source IP IP address of the portal authentication source subnet.
Destination IP IP address of the portal authentication destination subnet.
Mask Subnet mask of the IP address of the portal authentication subnet.
display portal local-server
Use display portal local-server to display configuration information about the local portal server,
including the supported protocol type, and the SSID binding information.
Syntax
display portal local-server [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.