R2511-HP MSR Router Series Security Command Reference(V5)

369
Default
No authentication domain is specified for portal users on an interface.
Views
Interface view
Default command level
2: System level
Parameters
domain-name: Specifies an authentication domain name, a case-insensitive string of 1 to 24 characters.
The domain specified by this argument must already exist.
Examples
# Configure the authentication domain for IPv4 portal users on Ethernet 1/1 as my-domain.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] portal domain my-domain
Related commands
display portal interface
portal free-rule
Use portal free-rule to configure a portal-free rule and specify the source filtering condition, destination
filtering condition, or both.
Use undo portal free-rule to remove a specific portal-free rule or all portal-free rules.
Syntax
portal free-rule rule-number { destination { any | ip { ip-address mask { mask-length | mask } | any } }
| source { any | [ interface interface-type interface-number | ip { ip-address mask { mask-length |
netmask } | any } | mac mac-address | vlan vlan-id ] * } } *
undo portal free-rule { rule-number | all }
Views
System view
Default command level
2: System level
Parameters
rule-number: Specifies the number for the portal-free rule, in the range of 0 to 255.
any: Imposes no limitation on the previous keyword.
ip ip-address: Specifies an IP address for the portal-free rule.
mask { mask-length | mask }: Specifies a mask or mask length for the IP address. The mask argument is
a subnet mask in dotted decimal notation. The mask-length argument is a subnet mask length, an integer
in the range of 0 to 32.
interface interface-type interface-number: Specifies a source interface.
mac mac-address: Specifies a source MAC address in the format H-H-H.