R2511-HP MSR Router Series Security Command Reference(V5)

374
• A loopback interface does not forward received packets. This can avoid impacting system
performance when there are many network access requests.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
portal
local-server
ip
No No No No
Supported on
MIM-FSW
modules,
MSR30-11E, and
MSR30-11F
No No
Examples
# Specify 1.1.1.1 as the listening IP address of the local portal server for Layer 2 portal authentication.
<Sysname> system-view
[Sysname] interface loopback 1
[Sysname-LoopBack1] ip address 1.1.1.1 32
[Sysname-LoopBack1] quit
[Sysname] portal local-server ip 1.1.1.1
portal max-user
Use portal max-user to set the maximum number of online portal users allowed in the system.
Use undo portal max-user to restore the default.
Syntax
portal max-user max-number
undo portal max-user
Views
System view
Default command level
2: System level
Parameters
max-number: Maximum number of online portal users allowed in the system.
Usage guidelines
If the maximum number of portal users specified in the command is less than that of the current online
portal users, the command can be executed successfully and does not impact the online portal users, but
the system does not allow new portal users to log in until the number drops down below the limit.
All MSR routers support the command, but they have different value ranges and default values: