R2511-HP MSR Router Series Security Command Reference(V5)

376
Command MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
portal
move-mode
auto
No No No No
Supported on
MIM-FSW
modules,
MSR30-11E, and
MSR30-11F
No No
Examples
# Enable support for portal user moving.
<Sysname> system-view
[Sysname] portal move-mode auto
portal nas-id-profile
Use portal nas-id-profile to specify a NAS ID profile for the interface.
Use undo portal nas-id-profile to cancel the configuration.
Syntax
portal nas-id-profile profile-name
undo portal nas-id-profile
Default
An interface is not specified with any NAS ID profile.
Views
Interface view
Default command level
2: System level
Parameters
profile-name: Name of the profile that defines the binding relationship between VLANs and NAS IDs, a
case-insensitive string of 1 to 16 characters. The profile can be configured by using the aaa nas-id profile
command. For more information about this command, see "AAA configuration commands."
Usage guidelines
If an interface is specified with a NAS ID profile, the interface prefers to use the binding defined in the
profile. If no NAS ID profile is specified for an interface or no matching binding is found in the specified
profile:
If a NAS ID is configured using the portal nas-id command, the device uses the configured NAS ID as
that of the interface.
Examples
# Specify NAS ID profile aaa for VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] portal nas-id-profile aaa