R2511-HP MSR Router Series Security Command Reference(V5)

378
Parameters
nas-port-id-value: NAS-Port-ID value, a case-sensitive string of 1 to 253 characters. This value is used as
the value of the NAS-Port-ID attribute in the RADIUS request to be sent to the RADIUS server when a
portal user logs on from an interface.
Usage guidelines
If the device uses a RADIUS server for authentication, authorization, and accounting of portal users,
when a portal user logs on from an interface, the device sends a RADIUS request that carries the
NAS-Port-ID attribute to the RADIUS server.
Examples
# Specify the NAS-Port-ID value of Ethernet 1/1 as ap1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] portal nas-port-id ap1
portal nas-port-type
Use portal nas-port-type to specify the access port type (indicated by the NAS-Port-Type value) on the
current interface. The specified NAS-Port-Type value is carried in the RADIUS requests sent from the
device to the RADIUS server.
Use undo portal nas-port-type to restore the default.
Syntax
portal nas-port-type { ethernet | wireless }
undo portal nas-port-type
Default
The access port type of an interface is not specified, and the NAS-Port-Type value carried in RADIUS
requests is the user access port type obtained by the access device.
Views
Interface view
Default command level
2: System level
Parameters
ethernet: Specifies the access port type as Ethernet, which corresponds to code 15.
wireless: Specifies the access port type as IEEE 802.11 standard wireless interface, which corresponds to
code 19. This keyword is usually specified on an interface for wireless portal users, making sure that the
NAS-Port-Type value delivered by the access device to the RADIUS server is wireless.
Examples
# Specify the NAS-Port-Type value of Ethernet 1/1 as IEEE 802.11 standard wireless interface.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] portal nas-port-type wireless