R2511-HP MSR Router Series Security Command Reference(V5)

387
• If the Web proxy server port 80 is added on the device, clients that do not use a proxy server can
trigger portal authentication only when they access a reachable host enabled with the HTTP service.
• Authorized ACLs to be assigned to the users who have passed portal authentication must contain a
rule that permits the Web proxy server's IP address. Otherwise, the user cannot receive heartbeat
packets from the remote portal server.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
portal web-proxy
port
No No No No Yes No No
Examples
# Add Web proxy server port number 8080 on the device, so that users using a Web proxy server with
the port number can be redirected to the portal authentication page.
<Sysname> system-view
[Sysname] portal web-proxy port 8080
reset portal connection statistics
Use reset portal connection statistics to clear portal connection statistics on a specific interface or all
interfaces.
Syntax
reset portal connection statistics { all | interface interface-type interface-number }
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all interfaces.
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Clear portal connection statistics on interface Ethernet 1/1.
<Sysname> reset portal connection statistics interface ethernet 1/1
reset portal server statistics
Use reset portal server statistics to clear portal server statistics on a specific interface or all interfaces.
Syntax
reset portal server statistics { all | interface interface-type interface-number }
Views
User view