R2511-HP MSR Router Series Security Command Reference(V5)

26
[Sysname] domain test
[Sysname-isp-test] authorization login radius-scheme rd local
Related commands
• local-user
• authorization default
• hwtacacs scheme
• radius scheme
authorization portal
Use authorization portal to configure the authorization method for portal users.
Use undo authorization portal to restore the default.
Syntax
In non-FIPS mode:
authorization portal { local | none | radius-scheme radius-scheme-name [ local ] }
undo authorization portal
In FIPS mode:
authorization portal { local | radius-scheme radius-scheme-name [ local ] }
undo authorization portal
Default
The default authorization method for the ISP domain is used for portal users.
Views
ISP domain view
Default command level
2: System level
Parameters
local: Performs local authorization.
none: Does not perform any authorization exchange. In this case, an authenticated portal user can
access the network directly.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The specified RADIUS scheme must have been configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
Examples
# Configure ISP domain test to use local authorization for portal users.
<Sysname> system-view
[Sysname] domain test