R2511-HP MSR Router Series Security Command Reference(V5)

32
display connection
Use display connection to display information about AAA user connections.
Syntax
display connection [ access-type { dot1x | mac-authentication | portal } | domain isp-name | interface
interface-type interface-number | ip ip-address | mac mac-address | ucibindex ucib-index | user-name
user-name | vlan vlan-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
access-type: Specifies the user connections of the specified access type.
• dot1x: Indicates 802.1X authentication.
• mac-authentication: Indicates MAC address authentication.
• portal: Indicates portal authentication.
domain isp-name: Specifies the user connections of an ISP domain. The isp-name argument represents
the name of an existing ISP domain and is a case-insensitive string of 1 to 24 characters.
interface interface-type interface-number: Specifies the user connections on an interface. Only Layer 2
Ethernet interfaces and WLAN virtual interfaces are supported.
ip ip-address: Specifies the user connections of an IP address.
mac mac-address: Specifies the user connections of a MAC address, with mac-address in the format
H-H-H.
ucibindex ucib-index: Specifies the user connection that uses the connection index. The value range for
the ucib-index argument is 0 to 4294967295.
user-name user-name: Specifies the user connections that use the username. The user-name argument is
a case-sensitive string of 1 to 80 characters. For a username entered without a domain name, the system
assumes that the user is in the default domain name or the mandatory authentication domain.
vlan vlan-id: Specifies the user connections of a VLAN. The value range for the vlan-id argument is 1 to
4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command does not display information about FTP user connections.
With no parameter specified, this command displays brief information about all AAA user connections.