R2511-HP MSR Router Series Security Command Reference(V5)

474
IP source guard configuration commands
display ip source binding
Use display ip source binding to display IPv4 source guard binding entries.
Syntax
display ip source binding [ static ] [ interface interface-type interface-number | ip-address ip-address |
mac-address mac-address ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
static: Displays static IPv4 source guard binding entries.
interface interface-type interface-number: Displays IPv4 source guard binding entries of the interface
specified by its type and number.
ip-address ip-address: Displays IPv4 source guard binding entries of an IP address.
mac-address mac-address: Displays IPv4 source guard binding entries of an MAC address (in the format
H-H-H).
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify the static keyword, the command displays all static and dynamic IPv4 source guard
binding entries. If you do not specify any other parameters either, the command displays static and
dynamic IPv4 binding entries on all ports.
If you specify the static keyword, the command displays static IPv4 source guard binding entries. If you
do not specify any other parameters, the command displays static IPv4 binding entries on all ports.
The following matrix shows the command and router compatibility:
Hardware Command com
p
atibilit
y
MSR900 No.
MSR93X No.
MSR20-1X No.