R2511-HP MSR Router Series Security Command Reference(V5)

476
ip source binding
Use ip source binding to configure a static IPv4 source guard binding entry on a port.
Use undo ip source binding to delete a static IPv4 source guard binding entry from a port.
Syntax
ip source binding { ip-address ip-address | ip-address ip-address mac-address mac-address |
mac-address mac-address } [ vlan vlan-id ]
undo ip source binding { ip-address ip-address | ip-address ip-address mac-address mac-address |
mac-address mac-address } [ vlan vlan-id ]
Default
No static IPv4 binding entry exists on a port.
Views
Layer 2 Ethernet port view
Default command level
2: System level
Parameters
ip-address ip-address: Specifies the IPv4 address for the static binding entry. The IPv4 address cannot be
127.x.x.x, 0.0.0.0, or a multicast IP address.
mac-address mac-address: Specifies the MAC address for the static binding in the format H-H-H. The
MAC address cannot be all 0s, all Fs (a broadcast address), or a multicast address.
vlan vlan-id: Specifies the VLAN for the static binding. vlan-id is the ID of the VLAN to be bound, in the
range of 1 to 4094.
Usage guidelines
You cannot configure the same static binding entry on one port, but you can configure the same static
entry on different ports.
You cannot configure a static binding entry on a link aggregation member port.
The following matrix shows the command and router compatibility:
Hardware Command compatibility Supported keywords
Maximum static
binding entries
MSR900 Yes on Layer 2 fixed Ethernet ports. mac-address 8
MSR93X No. N/A N/A
MSR20-1X No. N/A N/A
MSR20 No. N/A N/A
MSR30
Yes on MSR30 routers installed with
MIM-FSW or DMIM-FSW modules.
• ip-address
• mac-address
• vlan
8
Yes on MSR30-10 router installed
with XMIM-FSW modules.
mac-address 256