R2511-HP MSR Router Series Security Command Reference(V5)

521
Syntax
nat connection-limit-policy policy-number
undo nat connection-limit-policy policy-number
Views
System view
Default command level
2: System level
Parameters
policy-number: Specifies the number of an existing connection limit policy, in the range of 0 to 19.
Usage guidelines
To modify a connection limit rule in the policy that is already applied to the NAT module, use the undo
nat connection-limit policy command to remove the application first.
Examples
# Apply connection limit policy 1 to the NAT module.
<Sysname> system-view
[Sysname] nat connection-limit-policy 1
# Remove the application of connection limit policy 1 from the NAT module.
<Sysname> system-view
[Sysname] undo nat connection-limit-policy 1