R2511-HP MSR Router Series Security Command Reference(V5)

543
display habp table
Use display habp table to display HABP MAC address table entries.
Syntax
display habp table [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command applies only to an HABP server to display the MAC address entries collected by the HABP
server.
Examples
# On the HABP server, display HABP MAC address table entries.
<Sysname> display habp table
MAC Holdtime Receive Port
001f-3c00-0030 53 Ethernet1/1
Table 85 Command output
Field Descri
p
tion
MAC MAC address.
Holdtime
Lifetime of an entry in seconds. The initial value is three times the interval to send
HABP request packets. An entry will age out if it is not updated during the period.
Receive Port Port that learned the MAC address.
display habp traffic
Use display habp traffic to display HABP packet statistics.
Syntax
display habp traffic [ | { begin | exclude | include } regular-expression ]
Views
Any view