R2511-HP MSR Router Series Security Command Reference(V5)

545
Parameters
vlan-id: Specifies the ID of the VLAN in which HABP packets are to be transmitted. The value range is 1
to 4094.
Examples
# Specify the HABP client to belong to VLAN 2.
<Sysname> system-view
[Sysname] habp client vlan 2
habp enable
Use habp enable to enable HABP.
Use undo habp enable to disable HABP.
Syntax
habp enable
undo habp enable
Default
HABP is enabled.
Views
System view
Default command level
2: System level
Examples
# Enable HABP.
<Sysname> system-view
[Sysname] habp enable
habp server vlan
Use habp server vlan to configure HABP to operate in server mode and specify the VLAN in which HABP
packets are to be transmitted.
Use undo habp server to configure HABP to operate in the default mode.
Syntax
habp server vlan vlan-id
undo habp server
Default
HABP operates in client mode.
Views
System view
Default command level
2: System level