R2511-HP MSR Router Series Security Command Reference(V5)

591
[Sysname] FIPS mode change requires a device reboot. Continue?[Y/N]:y
Change the configuration to meet FIPS mode requirements, save the configuration
to the next-startup configuration file, and then reboot to enter FIPS mode.
# Disable FIPS mode.
<Sysname> system-view
[Sysname] undo fips mode enable
[Sysname] FIPS mode change requires a device reboot. Continue?[Y/N]:y
Change the configuration to meet non-FIPS mode requirements, save the configurat
ion to the next-startup configuration file, and then reboot to enter non-FIPS mo
de.
Related commands
display fips status
fips self-test
Use the fips self-test command to trigger a self-test on the cryptographic algorithms.
Syntax
fips self-test
Views
System view
Default command level
3: Manage level
Usage guidelines
To examine whether the cryptography modules operate correctly, you can use this command to trigger a
self-test on the cryptographic algorithms. The triggered self-test is the same as the power-up self-test.
If the self-test fails, the router automatically reboots.
Examples
# Trigger a self-test on the cryptographic algorithms.
<Sysname> system-view
[Sysname] fips self-test
Self-tests are running. Please wait...
Self-tests succeeded.