R2511-HP MSR Router Series Security Command Reference(V5)

54
ftp: Authorizes the user to use the FTP service. The user can use the root directory of the FTP server by
default.
lan-access: Authorizes the user to use the LAN access service. The users are mainly Ethernet users such
as 802.1X users.
pad: Authorizes the user to use the PAD service.
ssh: Authorizes the user to use the SSH service.
telnet: Authorizes the user to use the Telnet service.
terminal: Authorizes the user to use the terminal service, allowing the user to log in from the console, AUX
or Asyn port.
portal: Authorizes the user to use the portal service.
ppp: Authorizes the user to use the PPP service.
web: Authorizes the user to use the Web service.
Usage guidelines
You can assign multiple service types to the same user.
Examples
# Authorize user user1 to use the Telnet service.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] service-type telnet
state (local user view)
Use state to set the status of a local user.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
Default
A local user is in active state.
Views
Local user view
Default command level
2: System level
Parameters
active: Places the local user in active state to allow the local user to request network services.
block: Places the local user in blocked state to prevent the local user from requesting network services.
Usage guidelines
By blocking a user, you disable the user from requesting network services. No other users are affected.