R2511-HP MSR Router Series Security Configuration Guide(V5)

123
Verifying the configuration
# Display MAC authentication settings and statistics.
<Device> display mac-authentication
MAC address authentication is enabled.
User name format is fixed account
Fixed username:aaa
Fixed password: ******
Offline detect period is 180s
Quiet period is 180s.
Server response timeout value is 100s
The max allowed user number is 1024 per slot
Current user number amounts to 1
Current domain is 2000
Silent Mac User info:
MAC ADDR From Port Port Index
Gigabitethernet1/1 is link-up
MAC address authentication is enabled
Authenticate success: 1, failed: 0
Max number of on-line users is 256
Current online user number is 1
MAC ADDR Authenticate state Auth Index
00e0-fc12-3456 MAC_AUTHENTICATOR_SUCCESS 29
# After a user passes MAC authentication, use the display connection command to display online user
information.
<Device> display connection
Index=29 ,Username=aaa@2000
MAC=00-E0-FC-12-34-56
IP=N/A
IPv6=N/A
Total 1 connection(s) matched.
ACL assignment configuration example
Network requirements
As shown in Figure 47, a host connects to the device's port Ethernet 1/1, and the device uses RADIUS
servers to perform authentication, authorization, and accounting.
Perform MAC authentication on port Ethernet 1/1 to control Internet access. Make sure an authenticated
user can access the Internet but not the FTP server at 10.0.0.1.
Use MAC-based user accounts for MAC authentication users. The MAC addresses are hyphen separated
and in lower case.