R2511-HP MSR Router Series Security Configuration Guide(V5)

124
Figure 47 Network diagram
Configuration procedure
1. Make sure the RADIUS server and the access device can reach each other.
2. Configure the ACL assignment on the device:
Configure ACL 3000 to deny packets destined for 10.0.0.1.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule 0 deny ip destination 10.0.0.1 0
[Sysname-acl-adv-3000] quit
3. Configure RADIUS-based MAC authentication on the device:
# Configure a RADIUS scheme.
[Sysname] radius scheme 2000
[Sysname-radius-2000] primary authentication 10.1.1.1 1812
[Sysname-radius-2000] primary accounting 10.1.1.2 1813
[Sysname-radius-2000] key authentication simple abc
[Sysname-radius-2000] key accounting simple abc
[Sysname-radius-2000] user-name-format without-domain
[Sysname-radius-2000] quit
# Apply the RADIUS scheme to an ISP domain for authentication, authorization, and accounting.
[Sysname] domain 2000
[Sysname-isp-2000] authentication default radius-scheme 2000
[Sysname-isp-2000] authorization default radius-scheme 2000
[Sysname-isp-2000] accounting default radius-scheme 2000
[Sysname-isp-2000] quit
# Enable MAC authentication globally.
[Sysname] mac-authentication
# Specify the ISP domain for MAC authentication.
[Sysname] mac-authentication domain 2000
# Configure the device to use MAC-based user accounts, and the MAC addresses are hyphen
separated and in lowercase.
[Sysname] mac-authentication user-name-format mac-address with-hyphen lowercase
# Enable MAC authentication for port Ethernet 1/1.
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mac-authentication