Manualshelf

R2511-HP MSR Router Series Security Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router
31323334353637383940
20
No. Sub-attribute Descri
p
tion
61 User_Notify Information that must be sent from the server to the client transparently.
62 User_HeartBeat
Hash value assigned after an 802.1X user passes authentication, which is
a 32-byte string. This attribute is stored in the user list on the NAS and is
used for verifying the handshake messages from the 802.1X user. This
attribute only exists in Access-Accept and Accounting-Request packets.
140 User_Group
User groups assigned after the SSL VPN user passes authentication. A user
might belong to more than one user group. In this case, the user groups are
delimited by semi-colons. This attribute is used for cooperation with the SSL
VPN device.
141 Security_Level
Security level assigned after the SSL VPN user passes security
authentication.
201 Input-Interval-Octets Number of bytes input within a real-time accounting interval.
202 Output-Interval-Octets Number of bytes output within a real-time accounting interval.
203 Input-Interval-Packets
Number of packets input within an accounting interval, in the unit set on
the NAS.
204 Output-Interval-Packets
Number of packets output within an accounting interval, in the unit set on
the NAS.
205 Input-Interval-Gigawords Amount of bytes input within an accounting interval, in units of 4G bytes.
206 Output-Interval-Gigawords Amount of bytes output within an accounting interval, in units of 4G bytes.
207 Backup-NAS-IP Backup source IP address for sending RADIUS packets.
255 Product_ID Product name.
FIPS compliance
Table 4 shows the support of devices for the FIPS mode that complies with NIST FIPS 140-2 requirements.
Support for features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For
more information about FIPS mode, see Security Configuration Guide.
Table 4 Hardware and FIPS mode compatibility matrix
Hardware FIPS mode
MSR900 No.
MSR93X No.
MSR20-1X No.
MSR20 Yes.
MSR30 Yes (except the MSR30-16).
MSR50 Yes.
MSR1000 Yes.
AAA configuration considerations and task list
To configure AAA on the NAS: