R2511-HP MSR Router Series Security Configuration Guide(V5)

333
Figure 104 Portal server configuration
2. Configure the IP address group:
a. Select User Access Manager > Portal Service > IP Group from the navigation tree to enter the
portal IP address group configuration page.
b. Click Add to enter the page shown in Figure 105.
c. Enter the IP group name.
d. Enter the start IP address and end IP add
ress of the IP group.
Make sure that the host IP address is in the IP group.
e. Select a service group.
By default, the group Ungrouped is used.
f. Select the IP group type Normal.
g. Click OK.
Figure 105 Adding an IP address group
3. Add a portal device:
a. Select User Access Manager > Portal Service> Device from the navigation tree to enter the
portal device configuration page.
b. Click Add to enter the page shown in Figure 106.
c. Enter the device name NA
S.