R2511-HP MSR Router Series Security Configuration Guide(V5)

374
Figure 116 Specifying the host name (or IP address)
c. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username and
password. After entering the username (client001) and password (aabbcc), you can enter the
CLI of the server.
Publickey authentication enabled Stelnet server configuration
example
Network requirements
As shown in Figure 117, you can log in to the router through the Stelnet client (SSH2) that runs on the host.
The router acts as the Stelnet server, adopting publickey authentication and the RSA public key algorithm.
Figure 117 Network diagram