R2511-HP MSR Router Series Security Configuration Guide(V5)

61
{ IP address specified with the radius nas-ip command on the device.
{ IP address of the outbound interface (the default).
Figure 14 Adding the router as an access device
2. Add a user account for device management:
a. Click the User tab.
b. From the navigation tree, select Access User View > Device Mgmt User.
c. Click Add to configure a device management account as follows:
− Enter the account name hello@bbb and specify the password.
− Select the service type Telnet.
− Set the EXEC privilege level to 3. This argument identifies the privilege level of the Telnet user
after login and defaults to 0.
− Specify 10.1.1.0 to 10.1.1.255 as the IP address range of the hosts to be managed. The IP
address range must contain the IP address of the access device.
d. Click OK.