R2511-HP MSR Router Series Security Configuration Guide(V5)

71
d. Leave the default settings for other parameters and click OK.
The IP address of the access device specified here must be the same as the source IP address of the
RADIUS packets sent from the router, which is chosen in the following order on the router:
{ IP address specified with the nas-ip command.
{ IP address specified with the radius nas-ip command.
{ IP address of the outbound interface (the default).
Figure 22 Adding the router as an access device
2. Add a service:
a. Click the Service tab.
b. From the navigation tree, select User Access Manager > Service Configuration.
c. Click Add to configure a service as follows:
− Enter Portal auth as the service name.
− Enter dm1 as the service suffix to represent the authentication domain for the portal user.
With the service suffix configured, you must configure the access device to send usernames
that carry domain names to the RADIUS server.
− Configure other parameters as needed.
d. Click OK.
Figure 23 Adding a service
3. Add an access user account:
a. Click the User tab.
b. From the navigation tree, select Access User View > All Access Users.