R2511-HP MSR Router Series Security Configuration Guide(V5)

73
Figure 25 Portal server configuration
2. Configure an IP address group:
a. From the navigation tree, select User Access Manager > Portal Service> IP Group.
b. Click Add to configure an IP address group as follows:
− Enter the name Portal_user.
− Set the start IP address to 192.168.1.1 and the end IP address to 192.168.1.255. Make sure
the IP address group contains the IP address of the host.
− Select the action Normal.
c. Click OK.
Figure 26 Adding an IP address group
3. Configure the router as a portal device:
a. From the navigation tree, select User Access Manager > Portal Service> Device.
b. Click Add to configure a portal device as follows:
− Enter the device name NAS.
− Enter the IP address of the access interface on the router, which is 192.168.1.70.