R2511-HP MSR Router Series Terminal Access Command Reference(V5)

12
Use undo driverbuf size to restore the default setting.
Syntax
driverbuf size number
undo driverbuf size
Default
The size of the terminal receiver buffer is 8 KB.
Views
Terminal template view
Default command level
2: System level
Parameters
number: Buffer size, in kilobytes (KB), ranging from 8 to 32.
Usage guidelines
This command takes effect only after the template is reapplied on the interface.
Examples
# Set the terminal buffer size to 8 KB.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] driverbuf size 8
filter flow-control character
Use filter flow-control character to enable filtering of flow control characters.
Use undo filter flow-control character to restore the default.
Syntax
filter flow-control character
undo filter flow-control character
Default
Filtering of flow control characters is disabled.
Views
Terminal view
Default command level
2: System level
Usage guidelines
The filter flow-control character command only filters control characters 0x11 and 0x13 carried in the
data flows sent from the terminal to the FEP.
• 0x13—Enables flow control.
• 0x11—Disables flow control.