R2511-HP MSR Router Series Terminal Access Command Reference(V5)

14
undo menu hotkey
Default
No menu hotkey is configured.
Views
Terminal template view
Default command level
2: System level
Parameters
ascii-code&<1-3>: Sets the ASCII value of the menu hotkey, in the range of 1 to 255. The &<1-3> means
that you can provide up to three hotkey values.
Usage guidelines
If the current terminal operates on the service interface, you can switch to the menu interface by entering
the menu hotkey configured.
RTC terminal access does not support the menu function.
The ASCII value of the hotkey must be different from any other hotkey configured on the device.
Otherwise, hotkey conflicts will occur. For example, the hotkey value cannot be 17 or 19 because these
values are used for flow control.
Using the hotkey may not get a fast response when the terminal display is busy.
Before using this command, enable the router to print characters to the terminal and enable menu
printing.
Examples
# Configure the menu hotkey <Alt+A> with ASCII values 1, 96, and 13.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] menu hotkey 1 96 13
Related commands
• print information
• print menu
menu screencode
Use menu screencode to configure a menu screen code.
Use undo menu screencode to remove the menu screen code.
Syntax
menu screencode string
undo menu screencode
Default
No screen code is configured.
Views
Terminal template view