R2511-HP MSR Router Series Terminal Access Command Reference(V5)

15
Default command level
2: System level
Parameters
string: Sets the screen code of the terminal, a string of 1 to 15 case-insensitive characters.
Usage guidelines
Some types of terminals provide a screen saving function. When such a terminal receives a specific
screen code, such as \E!10Q (for more information about screen codes, see the related terminal
documents), it saves the current interface and switches to the corresponding screen.
This function requires terminal support, and the screen code configured on the router and that specified
on the terminal must be the same.
Screen codes vary with terminal types. For more information, see the corresponding terminal documents.
For example, Start terminals support \E!8Q, \E!9Q, \E!10Q, \E!11Q, \E!12Q, and \E!13Q screen
codes.
Examples
# Configure a menu screen code of \E!10Q.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] menu screencode \E!10Q
print connection-info
Use print connection-info to enable the printing of terminal connection information on the terminal.
Use undo print connection-info to disable the printing of terminal connection information.
Syntax
print connection-info
undo print connection-info
Default
Terminal connection information is printed on the terminal.
Views
Terminal template view
Default command level
2: System level
Usage guidelines
After a TCP connection is established between the terminal and the FEP, the terminal displays a success
message. To disable the message from being printed, use the undo print connection-info command.
Enable the router to print characters on the terminal before using this command.
Examples
# Enable the printing of terminal connection information on the terminal.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] print connection-info