R2511-HP MSR Router Series Terminal Access Command Reference(V5)

22
Syntax
rta relay disconnect { server-id client-id | all }
Views
System view
Default command level
2: System level
Parameters
server-id: Specifies a forwarding group ID, in the range of 0 to 63.
client-id: Specifies a client ID in the forwarding group, in the range of 0 to 9.
Examples
# Disconnect all client connections.
<Sysname> system-view
[Sysname] rta relay disconnect all
rta relay enable
Use rta relay enable to enable relay forwarding.
Use undo rta relay enable to restore the default.
Syntax
rta relay enable
undo rta relay enable
Default
Relay forwarding is disabled.
Views
System view
Default command level
2: System level
Usage guidelines
Relay forwarding is applicable to TCP-based RTC only.
Examples
# Enable RTC relay forwarding.
<Sysname> system-view
[Sysname] rta relay enable
rta relay listen-port
Use rta relay listen-port to set a TCP listening port.
Use undo rta relay listen-port to remove the configuration.
Syntax
rta relay listen-port port-number