R2511-HP MSR Router Series Terminal Access Command Reference(V5)

25
Parameters
recvbuff-size: Sets the socket receive buffer size, in the range of 512 to 16384 bytes.
sendbuff-size: Sets the socket send buffer size, in the range of 512 to 16384 bytes.
Usage guidelines
HP recommends that you use the default settings, because an improper configuration of the send buffer
size and receive buffer size can affect data forwarding efficiency and may cause system overload.
Examples
# Set the send buffer size and the receive buffer size for TCP connections on the relay server to 8194 bytes
and 2046 bytes, respectively.
<Sysname> system-view
[Sysname] rta relay tcp sendbuf-size 8194
[Sysname] rta relay tcp recvbuf-size 2046
rta rtc-server listen-port
Use rta rtc-server listen-port to configure the listening port on the RTC server.
Use undo rta rtc-server listen-port to cancel the configured listening port.
Syntax
rta rtc-server listen-port port-number
undo rta rtc-server listen-port port-number
Default
No listening port is configured on the RTC server.
Views
System view
Default command level
2: System level
Parameters
port-number: Specifies the listening TCP port number of the RTC server, in the range of 1024 to 50000.
Usage guidelines
Only one listening port can be configured.
Examples
# Configure the RTC server listening port number as 9010.
<Sysname> system-view
[Sysname] rta rtc-server listen-port 9010
rta server enable
Use rta server enable to enable terminal access on the router.
Use undo rta server enable to disable terminal access.