R2511-HP MSR Router Series Terminal Access Command Reference(V5)

26
Syntax
rta server enable
undo rta server enable
Default
Terminal access is disabled on the router.
Views
System view
Default command level
2: System level
Usage guidelines
After you disable terminal access, the settings of templates, terminals, and VTYs will be kept.
Examples
# Enable terminal access.
<Sysname> system-view
[Sysname] rta server enable
rta rtc version
Use rta rtc version to switch the RTC terminal access version.
Syntax
rta rtc version { v3 | v5 }
Default
RTC terminal access version is v5.
Views
System view
Default command level
2: System level
Usage guidelines
If you specify the keyword v3 on an RTC terminal, the host-id field is added to the negotiation packets
between clients and servers. This method applies to the network that comprises both v3 and v5 devices.
When you specify the keyword v5 on an RTC terminal, the host-id field is not added to the negotiation
packets between clients and servers. This method applies to the network that comprises only v5 devices.
Examples
# Switch the RTC terminal access version to v3.
<Sysname> system-view
[Sysname] rta rtc version v3
rta source-ip
Use rta source-ip to configure the global source IP address of TCP connections.