R2511-HP MSR Router Series Terminal Access Command Reference(V5)

IMPORTANT:

Data loss might occur during a primary/backup switchover.

A terminal can be created only after the configured terminal template is applied on the interface to

implement terminal access. Use the terminal-number argument to specify the terminal number. An

interface can be connected to only one physical terminal. The router identifies physical terminals by

terminal number.

At least one VTY should be configured in the terminal template for the template to be applied on the

interface. This command supports asynchronous serial interfaces, synchronous/asynchronous serial

interfaces, and AUX interfaces. When a synchronous/asynchronous serial interface operates in the

synchronous mode, you can configure RTC terminal access on the interface only. When a

synchronous/asynchronous serial interface operates in the asynchronous mode, you can configure all

access types except UDP-based RTC on the interface.

NOTE:

The transparent keyword is supported only on the fixed E1 interfaces of MSR20-12 routers and followin

routers that are installed with the SIC-E1 card: MSR20-1X, MSR30-10, MSR30-16, MSR30-11E, and

MSR30-11F.

Examples

# Apply the terminal template abc with the terminal number of 1 to interface Async 1/1.

<Sysname> system-view

[Sysname] interface async 1/1

[Sysname-rta-async1/1] rta terminal abc 1

rta vty-style smart

Use rta vty-style smart to enable pressing any key to return.

Use undo rta vty-style smart to restore the default.

Syntax

rta vty-style smart

undo rta vty-style smart

Default

Pressing any key to return is disabled:

• If you press an invalid menu option, the VTY displays the menu interface.

• If you press a key after a connection is terminated, the VTY re-establishes the connection.

• If the FEP providing a certain service is unreachable, the VTY initiates a connection attempt after

you press a key.

Views

System view

Default command level

2: System level