R2511-HP MSR Router Series Terminal Access Command Reference(V5)

31
screen save enable
Use screen save enable to enable screen saving.
Use undo screen save enable to disable screen saving.
Syntax
screen save enable
undo screen save enable
Default
Screen saving is enabled.
Views
Terminal template view
Default command level
2: System level
Usage guidelines
This function is effective for RTA access only, including Telnet, ETelnet, and SSH.
Examples
# Disable screen saving on temp1.
<Sysname> system-view
[Sysname] rta template temp1
[Sysname-rta-template-temp1] undo screen save enable
screen-size
Use screen-size to set the terminal screen display size. The size determines the maximum lines (screen
height) and columns (screen width) of characters that can be displayed on the screen.
Use undo screen-size to restore the default.
Syntax
screen-size height height-in-characters width width-in-characters
undo screen-size
Default
The screen can display up to 24 lines and 80 columns of characters.
Views
Terminal template view
Default command level
2: System level
Parameters
height-in-characters: Sets the screen display height, in the range of 20 to 100 characters.
width-in-characters: Sets the screen display width, in the range of 80 or 132 characters.